Skip to Main Content

Audio Systems

Shure wireless microphones and professional audio systems; for stage, conference, educational, and event applications.

Clear
SHURE RPW120 - Image 1

SHURE RPW120

The Beta 87A is one of the largest and most popular vocal condenser microphones for the stage.

View Details
SHURE RPW122 - Image 1

SHURE RPW122

The Shure Beta 87C is a premium quality cardioid hand-held condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability.

View Details
SHURE RPW124 - Image 1

SHURE RPW124

Omnidirectional condenser capsule offers superior sound capture and reinforcement with use of wireless handheld transmitters in critical ENG interview applications.

View Details
SHURE RPW170 - Image 1

SHURE RPW170

Wireless KSM8 capsule in brushed nickel enables wireless performance with the KSM8 Dualdyne Cardioid Dynamic Microphone.

View Details
SHURE RPW174 - Image 1

SHURE RPW174

Wireless KSM8 capsule enables wireless performance with the KSM8 Dualdyne Cardioid Dynamic Microphone.

View Details
SHURE RPW184 - Image 1

SHURE RPW184

The KSM9 is a Shure premium vocal microphone.

View Details
SHURE RPW186 - Image 1

SHURE RPW186

The KSM9HS is a Shure premium vocal microphone.

View Details
SHURE RPW192 - Image 1

SHURE RPW192

As the black wireless capsule version of the KSM11, the RPW192 delivers an elegant balance of full low end, rich mid-range, essential high-end detail, and incredible off-axis rejection when paired with Shure wireless handheld transmitters.

View Details
SHURE RPW194 - Image 1

SHURE RPW194

As the nickel wireless capsule version of the KSM11, the RPW194 delivers an elegant balance of full low end, rich mid-range, essential high-end detail, and incredible off-axis rejection when paired with Shure wireless handheld transmitters.

View Details
SHURE RPW200 - Image 1

SHURE RPW200

Nexadyne™ 8/C Cardioid Dynamic Wireless Capsule with black finish for use with Shure Handheld Transmitters

View Details
SHURE RPW202 - Image 1

SHURE RPW202

Nexadyne™ 8/C Cardioid Dynamic Wireless Capsule with brushed nickel finish for use with Shure Handheld Transmitters

View Details
SHURE RPW204 - Image 1

SHURE RPW204

Nexadyne™ 8/S Supercardioid Dynamic Wireless Capsule with black finish for use with Shure Handheld Transmitters

View Details
SHURE RPW206 - Image 1

SHURE RPW206

Nexadyne™ 8/S Supercardioid Dynamic Wireless Capsule with brushed nickel finish, for use with Shure Handheld Transmitters

View Details
SHURE UA221 - Image 1

SHURE UA221

Passive antenna splitter splits an incoming signal into 2 outgoing signals or combines 2 incoming signals into 1 signal.

View Details
SHURE UA8 - Image 1

SHURE UA8

Compatible with Axient, UHF-R, ULX-D, ULX, SLX and BLX4R receivers and PSM1000 and PSM900 transmitters (frequency range dependent).

View Details
SHURE UA806 - Image 1

SHURE UA806

6-foot coaxial cable offers BNC to BNC connection.

View Details
SHURE UA8100 - Image 1

SHURE UA8100

100-foot coaxial cable offers BNC to BNC connection.

View Details
SHURE UA825 - Image 1

SHURE UA825

25-foot coaxial cable offers BNC to BNC connection.

View Details
SHURE UA834 - Image 1

SHURE UA834

UA834 replaces UA830. In-Line UHF Antenna Amplifier for remote mounting antennas with BLX4R, SLX4, QLX-D, ULX-D, UR4 and AXT400 receivers or UA844+ and UA845UWB Antenna Distribution Systems.

View Details
SHURE UA845UWB - Image 1

SHURE UA845UWB

Active Antenna/Power Distribution System, five-way, wideband VHF and UHF, internal power supply.

View Details
SHURE UA860SWB - Image 1

SHURE UA860SWB

The Shure UA860SWB is a passive wide band UHF omnidirectional antenna.

View Details
SHURE UA860V - Image 1

SHURE UA860V

Passive omnidirectional antenna offers 360-degree coverage for use with Shure wireless products.

View Details
SHURE UA864 - Image 1

SHURE UA864

The UA864 antenna provides wideband RF coverage in a low-profile enclosure that easily mounts on a wall or ceiling.

View Details
SHURE UA874 - Image 1

SHURE UA874

UA874 uses a log periodic dipole array to produce a cardioid pattern towards the desired coverage area with greater rejection of RF signals outside the coverage area when compared to standard ½ wave omnidirectional antennas.

View Details

A Sound System Isn’t Just a Single Product—It’s a Complete Setup from Start to Finish

Almost all conversations that begin with “We need a sound system” are actually requests for a full installation. The sound captured by the microphone is processed through a mixer, sent to an amplifier, and distributed throughout the venue via the speakers. If any link in this chain is mismatched for the venue, the result will be poor—no matter how high-quality the other equipment is. That’s why we don’t just deliver individual products; we deliver a fully functional system for the entire venue.

Three Factors That Determine What Your Hall Needs

  • Volume and Acoustics In a hall with high ceilings and hard surfaces, sound spreads out and speech intelligibility decreases. The number and placement of speakers are determined based on this factor.
  • Number of Simultaneous Sources A single speaker versus a panel discussion requires a different number of channels; the number of channels determines the size of both the mixer and the receivers.
  • Frequency of Use and Who Will Operate It: In a room where meetings are held daily, the system must be able to be turned on with a single button; in a room with a technical team, a more flexible setup may be preferred.

Conference Rooms and Event Spaces Have Different Needs

In conference and meeting rooms, the priority is speech intelligibility: the goal is for the person in the back row to hear the speaker without difficulty and for the microphone to avoid feedback. In event spaces and multipurpose halls, music also comes into play; the system must handle a wider frequency range and higher sound pressure levels. For this reason, the equipment lists for these two setups are different, which is why it’s important to clarify the room’s intended use before installation.

You Can Also Purchase Sound System Components Separately

If you’re setting up from scratch, pre-packaged sets that include both the receiver and transmitter are the quickest option. If you already have a working system, simply replacing the missing part is often sufficient—in this section, you can find microphones, headset systems, instrument systems, combo sets, and individual transmitters and receivers separately. If you’re not sure which one is compatible with your current setup, let us know what equipment you have, and we’ll verify compatibility before providing a quote.

Installation, Commissioning, and Technical Support

Site survey, installation, cabling, level and frequency adjustments, and handover to the team are all handled as a single package. In most projects, the audio side is planned alongside the video; our professional audio and video solutions, along with our meeting and video conferencing systems, are integrated within the same room. If you’d like to review the planning steps in advance, please refer to our audio system planning guide.

Audio System Pricing and Quotation Process

The price is determined by the room’s size, the number of channels, and the scope of the installation; any quote provided without these three details will not be realistic. Please provide us with the room’s approximate dimensions, its capacity, the number of microphones to be used simultaneously, and the intended use of the room. We’ll prepare an installation plan with alternative options based on your budget and get back to you—you can reach us via our contact page.

Request a quote for Audio Systems

Tell us the installation site, the quantity you need and how the system will be used; we will define the right model and the scope of installation together.

Request a Quote

Let's Find the Right Solution for Your Project

Contact our team for corporate AV, digital signage or professional visualization solutions tailored to your needs.